Knowledgebase: Setting Up
Grandstream HT701 / HT702 Installation Guide
Posted by on 17 September 2014 09:59 AM

To begin using your new VOIPo service, simply connect the VOIPo adapter to your internet connection.

 

1)  Phone - Plug your telephone into Phone Port of the adapter. (do not connect the equipment through POTS/in-home telephone wiring)


2)  Internet - Plug the provided ethernet cable into the LAN port of the HT701 / HT702 adapter.  Plug the other end of the ethernet cable into your router or modem.

 

3)  Power - Plug the AC power adapter into the VOIPo adapter and plug it into an electrical outlet.  Reboot your modem or router and then the adapter.

 

Congratulations – Within 3-5 minutes, you should be able to make and receive calls.

 

Do NOT reboot or unplug the device for at least 5 minutes.

It may take a few minutes to activate and update itself.

(2 vote(s))
Helpful
Not helpful

Comments (0)